If time does not repair or replace the defective hub, then it is likely you can get into a serious accident or due to jamming the wheel at speed, whether by reason of the separation of the disk from the shaft.
In addition, a faulty hub is strongly heated, and, thus, has a negative impact on the normal operation of the braking system of the wheel.
The hub never fails simultaneously, if there was a strong impact from the entrance at speed in a hole, a curb or a bump. It is destroyed gradually, and usually the fault is accompanied by an unpleasant sound, vibration body, the sensations rolling and weak shocks.
The main causes of damage to the wheel hub: sloppy driving on rough roads, overloading of the vehicle, aggressive driving with sharp braking and accelerations.
Depending on the above, may be deformed hub body, split outer or inner rim of the bearing to dry lube, as a result of falling inside twisting parts of sand, moisture and dirt.
Our client, a truck driver from Lithuania was not able to determine the problem appeared in its trailer Schmitz at the initial stage. Since this may be done only using special diagnostic equipment. However, moving on A72 autobahn near the city of Chemnitz, he heard the distinctive sound resembling the roar of an airplane, accompanied by the crunching and gnashing. The driver decided to stop the truck in the nearby Parking lot to fix the problem.
For advice, he appealed to the international service drivers AWHelp24. The service operator has connected the driver to the mechanic and after consultation it was decided to send to the place of forced stop, the pit crew.
On the spot it turned out that the replacement hub and wheel bearing of the semi-trailer Schmitz. Taking advantage of the fast delivery of the parts from online store partsbit.de mechanics made replacement of defective parts and the driver returned on his route. No less joy for him was tangible cost savings for repair.
Call our service hotline!!!
Help is closer than you think!